BHGGM - INSTAPAK PORT CLEANER BLO

  • MSDS: BHGGM
  • Manufacturer: SEALED AIR CORP
  • Product Name: INSTAPAK PORT CLEANER BLO
  • National Stock Number: 8135-00F003857
Product Identification

Product ID:INSTAPAK PORT CLEANER BLO
MSDS Date:05/01/1987
FSC:8135
NIIN:00F003857
MSDS Number: BHGGM

Responsible Party
SEALED AIR CORPORATION
OLD SHERMAN TNPK
DANBURY, CT 06810

Emergency Phone: (203) 791-3500

Info Phone: (203) 791-3500

Preparer: MICHAEL R. SANDNER

Cage: OC634

Contractor
SEALED AIR CORPORATION
DANBURY, CT 06810 US

Telephone: 203-792-2360,800-424-9300 CHEMTREC

Cage: OC634

Ingredients

BUTYRIC ACID LACTONE, TETRAHYDRO-2-FURANONE, BLO

CAS: 96-48-0

RTECS: LU3500000

Fraction By Weight: 97%


CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 3 - 5%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

Hazards

LD50 LC50 Mixture:ORAL LD50 = 1580 MG/KG (RATS)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NARCOSIS. SKIN: WILL
REMOVE NATURAL SKIN OILS/MAY HAVE SLIGHT ANALGESIC EFFECT. EYE:
SEVERE IRRITATION, BURNING, CONJUCTIVITIS, OPAQUENESS OF CORNEA.
INGESTION: IF SIGNIFICANT QUANTITY IS INGESTED, SENSES MAY BE
DULLED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NARCOSIS. SKIN: SLIGHT ANALGESIC
EFFECT. EYE: IRRITATION, BURNING, CONJUCTIVITIS, OPAQUENESS OF
CORNEA.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
CONSULT PHYSICIAN. SKIN: WASH W/SOAP & WATER. EYE: FLUSH W/WATER
FOR AT LEAST 15 MINUTES, HOLDING LIDS OPEN WITH FINGERS. CONSULT
PHYSICIAN. INGESTION: IF IN LARGE QUANTITIES, GIVE 2 GLASSES OF
WATER & INDUCE VOMITING. CONSULT PHYSICIAN. NO SPECIFIC ANTIDOTE;
TREATMENT IS SYMPTOMATIC.

Fire Fighting

Flash Point Method:CC
Flash Point:200F
Lower Limits:1.4%
Upper Limits:6.9%
Extinguishing Media:WATER, ALCOHOL FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED
W/SELF-CONTAINED BREATHING APPARATUS & PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:ABSORB ON LOOSE, ABSORBENT, NON-BIODEGRADABLE
MATERIAL & DISPOSE OF WITH SOLID WASTE IN ACCORDANCE WITH FEDERAL,
STATE & LOCAL REGULATIONS. FLUSH SPILL AREA WITH WATER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAMES.

Exposure Controls

Respiratory Protection:NONE REQUIRED IN NORMAL USE.
Ventilation:GOOD GENERAL VENTILATION
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:EYE WASH STATION.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:399F
Melt/Freeze Pt:M.P/F.P Text:-47F
Vapor Pres:1
Vapor Density:3.0
Spec Gravity:1.1240
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR, FAINT ETHER-LIKE ODOR
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT & FLAME.
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:DON'T EXPOSE PRESSURIZED CANS TO
TEMPERATURES >120F.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH EXISTING FEDERAL,
STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. DON'T INCINERATE
PRESSURIZED CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.